Rig Recipe Open the App

Rig Recipe › Players › Stephen Carpenter

Stephen Carpenter Helix Stadium Preset

Rig Recipe builds a Helix Stadium preset from Stephen Carpenter's documented gear, starting from ADA MP-1 MIDI preamp and Marshall JMP-1 MIDI preamp modeled with the Brit 2204. Pick one of 2 researched eras below, then choose a snapshot set and download an 8-snapshot preset that is level-matched and checked against the unit's limits.

Stephen Carpenter is Deftones' guitarist, known for a huge, low and saturated tone that mixes crushing riffs with atmospheric textures. In the late 90s it came from blended ADA MP-1 and Marshall JMP-1 preamps into Marshall power amps; by 2011 it ran through EMG-loaded ESP 7- and 8-strings, a JMP-1 and Guitar Rig into Marshall EL34 power amps.

Build Stephen Carpenter's PresetAlternative Metal · Nu Metal

Around the Fur era (1999)

Solid Sources first-hand sources cover the main gear, with some details still open.

GuitarsESP Horizon (green); Various custom ESP Horizons
AmpsADA MP-1 MIDI preamp; Marshall JMP-1 MIDI preamp; Two Marshall 9200 power amps
CabsFour Marshall 4x12 cabinets
Pedals and EffectsWhirlwind A/B box feeding both preamps (switcher); Rocktron Replifex multi-effects (rack, in the loop) (multi-effects); Rocktron Silencer noise reduction (rack, in the loop) (noise gate); Boss OC-2 Octave (in the loop) (octave); Boss PN-2 tremolo/pan (in the loop) (tremolo); Boss FZ-2 Hyper Fuzz (in the loop) (fuzz); Korg DTR-1 rack tuner (tuner); Rane line mixer blending the preamps before the power amps (mixer)
TuningNot shown on the diagrams
SoundThick, wide and saturated rack-preamp tone: an ADA MP-1 and Marshall JMP-1 blended into Marshall power amps for a huge, slightly fizzy wall of distortion with deep low end.
How the Effects Are UsedEffects listed in signal order from the diagrams. An A/B box feeds the two MIDI preamps, and a Rocktron Patchmate loop switcher (controlled by a Rocktron All-Access MIDI pedal) brings in the Replifex, Silencer and Boss octave, tremolo and fuzz pedals. A Rane mixer combines everything into the two Marshall 9200s.
SongsMy Own Summer (Shove It), Be Quiet and Drive (Far Away)

How Rig Recipe Maps It to Helix Stadium

Real GearHelix Stadium Model
ADA MP-1 MIDI preamp
amp
Brit 2204 (closest)
Four Marshall 4x12 cabinets
cab
4x12 1960 T75 (closest)
Rocktron Silencer noise reduction (rack, in the loop)
noise gate
Noise Gate (closest)
Boss OC-2 Octave (in the loop)
octave
Boctaver
Boss PN-2 tremolo/pan (in the loop)
tremolo
Tremolo
Boss FZ-2 Hyper Fuzz (in the loop)
fuzz
Wringer Fuzz (closest)

Helix Stadium starting point: Brit 2204, gain around 6.5. Use a JCM800-style amp at high gain with the low end full and the mids slightly scooped into a Marshall 4x12. Add an octave-down block and a tremolo for textures, and a gate after the amp.

Build This Preset8 snapshots, level-matched, ready to download as .hsp

Diamond Eyes era (2011)

Solid Sources first-hand sources cover the main gear, with some details still open.

GuitarsESP Custom Stephen Carpenter signature 8-string (black); ESP 'Tribute' Custom Stephen Carpenter signature 8-string (white); ESP Custom 'Elet' 7-string (black, Telecaster-style); ESP Custom Stephen Carpenter signature 7-string (green)
AmpsMarshall JMP-1 valve MIDI preamp; Native Instruments Guitar Rig on a 2009 MacBook Pro; Marshall EL34 100/100 dual monobloc power amp (plus a second as backup)
CabsTwo Marshall 1960B 4x12 cabinets with Celestion G12K-100 speakers, in isolation boxes
Pedals and EffectsErnie Ball volume pedal (volume); Eventide PitchFactor (pitch); Rocktron Intellifex (rack) (multi-effects); Z.Vex Fuzz Factory (fuzz); Z.Vex Machine (distortion); TC Electronic PolyTune (tuner); MXR M288 Bass Octave Deluxe (octave); MXR M135 Smart Gate (noise gate); Z.Vex Lo-Fi Loop Junky (modulation); Z.Vex Ringtone (sequencer); Z.Vex Seek Wah (filter); MXR EVH117 Flanger (flanger); MXR M148 Micro Chorus (chorus); MXR EVH90 Phase 90 (phaser); MXR M103 Blue Box (octave fuzz); MXR/Custom Audio Electronics MC401 Boost/Line Driver (boost); MXR M169 Carbon Copy analog delay (delay)
Tuning8-strings in standard 8-string tuning (F# B E A D G B E, Dunlop 11-69); 'Elet' 7-string with six strings in drop D down a whole step plus a high D (C G C F A D D); green 7-string in standard with a high E (E A D G B E E)
SoundDense, low-tuned extended-range distortion from EMG-loaded 7- and 8-strings, built on a Marshall JMP-1 and software amp modelling into Marshall EL34 power amps. Huge low end with a smooth, saturated top, plus odd textures from a large board of Z.Vex and MXR pedals.
How the Effects Are UsedPedals listed in the diagram's numbering, not confirmed signal order: they sit in loops of a Custom Audio Electronics routing system, so any combination can be called up in any order. The volume pedal and Eventide PitchFactor sit on the controller board, and the MXR Smart Gate runs from the controller board to the amps.
SongsDiamond Eyes, Rocket Skates

How Rig Recipe Maps It to Helix Stadium

Real GearHelix Stadium Model
Ernie Ball volume pedal
volume
Volume (closest)
Eventide PitchFactor
pitch
Simple Pitch (closest)
Z.Vex Fuzz Factory
fuzz
Industrial Fuzz
Z.Vex Machine
distortion
Vermin Dist (closest)
MXR M288 Bass Octave Deluxe
octave
Boctaver (closest)
MXR M135 Smart Gate
noise gate
Noise Gate (closest)
Z.Vex Ringtone
sequencer
10 Band Graphic (closest)
Z.Vex Seek Wah
filter
Fassel (closest)
MXR EVH117 Flanger
flanger
Gray Flanger (closest)
MXR M148 Micro Chorus
chorus
70s Chorus (closest)
MXR EVH90 Phase 90
phaser
Script Mod Phase
MXR M103 Blue Box
octave fuzz
Boctaver (closest)
MXR/Custom Audio Electronics MC401 Boost/Line Driver
boost
Kinky Boost (closest)
MXR M169 Carbon Copy analog delay
delay
Bucket Brigade (closest)
Marshall JMP-1 valve MIDI preamp
amp
Brit 2204 (closest)
Two Marshall 1960B 4x12 cabinets with Celestion G12K-100 speakers, in isolation boxes
cab
4x12 1960 T75 (closest)
Z.Vex Lo-Fi Loop Junky
modulation
Deluxe Looper (closest)

Helix Stadium starting point: Brit 2204, gain around 6.5. Use a JCM800-style amp at high gain with a tight low-end EQ for 7- and 8-string parts, with a noise gate after it. Add octave, fuzz and pitch blocks for texture, and an analog-style delay for clean passages.

Build This Preset8 snapshots, level-matched, ready to download as .hsp

Questions About Stephen Carpenter's Tone

What Amp Does Stephen Carpenter Use?

In the Around the Fur era (1999), the documented amps are ADA MP-1 MIDI preamp, Marshall JMP-1 MIDI preamp and Two Marshall 9200 power amps.

Which Helix Stadium Amp Model Is Closest to Stephen Carpenter's Tone?

Rig Recipe starts from the Brit 2204 with its gain around 6.5, then sets each snapshot from there.

What Snapshots Does the Stephen Carpenter Preset Include?

The Default 8 set: CLEAN, RHYTHM, CRUNCH, LEAD, LEAD+, AMBIENT, MOD LEAD, DRY LEAD. Each snapshot has its own job, from a full clean to a dry, upfront lead, and the levels are matched across all eight.

Not Confirmed Yet

The 1999 and undated diagrams show the same rack, so the undated one is treated as late-90s (its guitars are the only guitar source for that era). Tunings and string gauges for the 1999 era are not shown. In 2011 the pedals sit in a programmable loop system, so their order in the chain is not known, and the split between the JMP-1 and Guitar Rig for the main tone is not stated. Amp settings are not shown for either era, and neither era has an independent second gear source.

Sources

Researched November 19, 2026 from first-hand sources. Rig Recipe links to them and summarizes in its own words.

  1. GuitarGeek rig diagram: Stephen Carpenter, Deftones, 1999 (archived) · rig rundown
  2. GuitarGeek rig diagram: Steven Carpenter of the Deftones, undated (archived) · rig rundown
  3. GuitarGeek rig diagram: Stephen Carpenter, Deftones, 2011 (archived) · rig rundown
  4. Rig Diagram: Stephen Carpenter, Deftones (2011) · rig rundown

Similar Players